Out For The Day

Yesterday  the plan was to do a bit of boat work now that Janet has returned from her adventures in Haiti.

When we left Racine a few weeks ago we hoisted our furled gennaker before we left the dock. Normally this would have been fine if it wasn’t for the 20+ knots of wind swirling around. Upon leaving the harbor the head of the gennaker began to unfurl and wrapped back on itself becoming hopelessly fouled. We dropped the sail and stuffed it in the sail locker waiting for a calm day to sort it out.

Yesterday morning there was no wind, so it became ‘Fix The Gennaker Day”. It was a pretty straight forward affair of untangling the huge sail and carefully flaking it out on the deck, hoisting and refueling it.

With that task done, we left the marina and headed over to the fuel dock to fill our tanks for the season, 72 gallons of diesel fuel for $239. I’ll be surprised if we visit a fuel dock again this season, the great benefit of owning a sailboat.

Once fueled and looking at a stiffening breeze and sunny skies we made the decision to just sail.  Janet put us on a close reach, we set the mainsail and the jib and headed out past the racing boats and just kept going. We realized that few boats venture out past 2-3 miles from shore, and almost no one is on AIS.  Note to self… use the radar more 🙂

We should have hove to for lunch, but decided to stay on the reach and enjoy a cheese plate healed over.  The sun and wind were almost perfect as we moved along at a comfortable 7 knots.

After a bit of a messy tack, we brought her around and headed back to the marina, arriving at the same time as a typical midwest thunder storm. We tied up and got out the foul weather jackets to finish securing the boat. By the time we were done, the weather had cleared to sunny skies again and we wandered over to The Dock for a beer. All-in-all a good day.


Marina Life

We’re getting settled into marina life.  The most notable advantage is that our house is 3-miles from Tortuga’s slip.  After spending a year flying back and forth across the country to get aboard, this level of access is very strange.

The marina that we are berthed in is run by the Chicago Parks District and contains everything from small sailboats to million dollar powerboats.  Expectedly, there is a tremendous disparity of boating experience and seamanship.

Standing on the dock chatting with the skipper of a J/40 racing sailboat yesterday we saw a 30’ powerboat approaching a nearby slip.  Being helpful neighbors we wandered over to the slip to give the arriving crew a hand with their lines and tying the boat up.  Onboard were four “twenty-something” guys looking seriously anxious at their intended slip.  My sailor friend asked the crew for their bow line.  “Huh?…We don’t have one”.  No fenders were hanging over the side of the boat needed to protect the polished hull from the harsh wooden dock.  I asked for a stern line, and one of the crew threw me a line… all of it…both ends…secured to nothing.  I tossed an end back and asked him to secure it to an aft cleat.  I didn’t know that you could use a square knot on a cleat… you can’t.

In the end, we got the boat tied up, keeping it well away from a beautiful Jeanneau 50 that was sharing the well.  My sailor friend said that we’ll see a lot of that in the marina over the summer. The adventure continues.


A New Home in Chicago

Well, that took a bit of time.  We finally arrived in our new home port of Chicago the other day, after a chilly and breezy passage down from Racine, Wisconsin.

Tortuga wintered at the Racine Riverside Marina inside a heated warehouse.  During the cold months the yard labored to repair the damages that the boat had suffered as a result of her trip from Canada to the Great Lakes last Fall.  A gouge in the aluminum hull had to be repaired as well as a wrecked portlight.  To the yard’s credit the lads did a fantastic job.  Along the way they replaced the lifelines, sent the sails out for some repair and a good washing, and polished the hull.

Like last year, final commissioning took about a month.  Tortuga was gently placed in the water and the mast went up in short order.  All of the electronics needed to be reestablished and checked. The motor needed some adjustments. The sails were installed, and the running rigging was sorted out.  Many of the boat’s engineering systems proved to be a learning adventure for the yard, but in the end it all turned out fantastically.


Last week was a complete scrub down, both inside and out, that cleared away the winter’s accumulated dust and grim.  We did a short sea trial of the motor on a very cold and blustery day, and finally got all of the provisions onboard.

Over the weekend, the only days that Janet and I had mutually available, we brought our friend Anu onboard and set out for Chicago. The intent was to sail but the 30 knot winds and high, disorganized waves made the passage more uncomfortable than it needed to be.  We fired up the motor, and along with a headsail we averaged 8 knots and made it to Chicago in the late afternoon.

We’re currently tied up in a slip and are settling into marina life.  Now if it would just warm-up a little…